(*2) The firmware needs to be the follwong version. (*1) On software, it is run in the WOW64 mode (32-bit emulation mode) when the 64-bits Windows OS is used. menu in Graphtec Pro Studio can only hold the cutting condition of connected cutting plotter.Īs switching cutting plotter in menu, displayed cutting condition will be reset and obtain data of the next plotter from. Procedure: > Click on the right tab of > tab > button > Set cutting conditions from /
* When operating multiple cutters with single Graphtec Pro Studio, please set cutting conditions of each cutters from menu and switch from cutter to cutter. * Data Link cannot be used with the port created when installing OPS662. * It cannot be used on the port created by other drivers (e.g. (2) When using LAN (network) connection: "Add device settings" > "TCP / IP" (1) When using USB connection: "Add device settings" > "Graphtec USB" * In case of using Data Link in Cutting Master 4/Graphtec Pro Studio, select and use the following two patterns depending on the connection method. How to install, activate the Graphtec Pro Studio or Graphtec Pro Studio Plus Date of updatedĬE7000 series / FC9000 series / CE LITE-50 / CE6000 Plus series / FC8600 series / CE6000 seriesġ152 × 854 (at least), 16 bit color or more Note: If you are using CE5000 series, please use Ver2.10.
Note: If you are using FC8000 series, please use Ver2.21.
Note: If Graphtec Pro Studio / Plus is used on Windows 7, it should be in Ver.2.90. Downloading Files Ver.3.40 (Latest version)
0 kommentar(er)
